Deck & Fence Staining in Orem, Utah
Protect the wood you paid for before the sun takes it back.
Orem's post-war grid of brick ramblers and split-levels is aging into a repaint wave: fascia, soffits, and window trim take the worst of the snow-line weathering while the brick itself needs nothing. We quote trim-and-siding-only scopes often here — you shouldn't pay whole-house prices for the wood parts.
Bare or failing wood outdoors loses the fight fast: UV turns it gray, water opens checks and splits, and within a few seasons boards cup, splinter, and rot. Staining is cheap insurance — a properly prepped penetrating stain shields decking, pergolas, and fencing from the sun and moisture cycles that destroy them.
Moorhouse Coating's process starts with a wash and, where needed, a wood brightener to neutralize gray oxidation. Once the wood is dry to spec, we apply penetrating oil or hybrid stains on horizontal surfaces that wear hard, and solid or semi-transparent finishes on fences depending on the look you want. Every product is chosen for exterior wood movement — never a film-building porch paint that peels in sheets.
Describe your deck or fence footage and current condition online and get an instant price. Book with a 25% deposit; workmanship is covered by our 2-year labor warranty.
Pricing in Utah
Utah rates run roughly 10% below our Arizona pricing, reflecting local labor and material costs along the Wasatch Front and in southern Utah. Exterior work is scheduled inside the April-October weather window, and your instant quote itemizes prep, labor, and materials so there are no surprises.
Why Orem Chooses Moorhouse
Wood-Specific Prep
Wash, brighten, and moisture-check before staining — stain only bonds to clean, dry, open-grained wood.
Right Product per Surface
Penetrating stains for walking surfaces, semi-transparent or solid for verticals — matched to wear, not habit.
Priced by the Foot, Instantly
Deck square footage or fence linear footage in, real price out. No one has to come measure first.
Extends Wood Life for Years
Regular staining postpones board replacement — the cheapest maintenance a deck or fence will ever get.
Deck & Fence Staining FAQs
How often should a deck be re-stained in this climate?
Horizontal surfaces in intense sun need attention every 2-3 years; shaded decks and vertical fence surfaces stretch to 4-6. A quick water-drop test tells you: if water soaks in instead of beading, the wood is ready for another coat.
What's the difference between transparent, semi-transparent, and solid stain?
Transparent shows the most grain but offers the least UV protection; semi-transparent balances color and grain visibility; solid stain covers like paint while still flexing with the wood. High-sun exposures generally warrant semi-transparent or solid for longevity.
Can you stain a brand-new fence or deck?
Yes, but pressure-treated lumber needs to dry out first — usually 4-8 weeks in dry climates — or the stain cannot penetrate. Cedar can typically be stained sooner. We verify readiness with a moisture reading before we start.
My deck is gray and splintered. Is it too far gone to stain?
Usually not. Washing plus a wood brightener removes the gray oxidized layer, and sanding takes down splinters. Boards that are rotted or structurally cracked should be replaced first — we flag those during prep with photos before staining anything.
Do you stain both sides of a fence?
We stain whichever sides you own or your neighbor agrees to — one side, both sides, or alternating panels. The instant quote prices per side of linear footage, so you only pay for the faces we're coating.
Ready for a price? It takes 10 minutes.
Answer a few questions about your Orem project and see a real, line-itemed quote instantly — then book online with a 25% deposit.